10M*20mm*0.15mm Hot Melting Heat Sealing Waterproof Tape

  • Sale
  • Regular price £12.00
Tax included.

10 Meters not a Roll 20mm Wide 3 Layer Polyester Lycar TPU 
Heat Melting Seam Sealing 
Waterproof Tape for Outdoor Clothing and Tents 



High adhesion & water resistance, high air permeability, superior resistance against washing and dry-cleaning, suit to waterproof and breathable fabrics. 
Thickness: 0.25mm, 0.3mm, 0.35mm, 0.45mm 
Available Width: 15mm-1250mm 
Colour: black, gray,white,etc.

Component: Elastic fabric + TPU + Hot Melt Glue, Smooth and non-sticky at room tempetature. 
Special Use: Tents, Raincoats, Waterproof Clothing, Outdoor Clothing, Ski-Wear, Mountaineering Wear with PU Coating Fabric Laminating. 

Highest Temperature: 140 °F 
Lowest Temperature: -22°F 
Melting Point: 302°F 
Washing Water Temperature: below 104°F 
Dry Cleaning: According to the fabric 


Hot melt glue is used in hot air pressure plastic machines. Hot air blower of high temperature melt rubber strip surface and through the pressurized air to press the rubber coating on fabric. After curing, the strip rubber and cloth coating form as a whole so as to achieve the sealing seam. The basic principle is, thick material by thick strips, light by thin strips. Most ordinary tent fabric coating is PU coating, and generally should use the PU strip. 

For rubber Tape series, rubber side should face the coating material of cloth. If the material is thick PVC coating cloth, rubber coating is generally selected. 

Electric ironing. After necessary practice, you can press and finish your good "masterpiece". The smooth surface of strip sticking the coating of cloth, and then through the white paper or some other light material, electricity iron ironing on it, firstly testing from low temperature for a few seconds. Practicing a few times more, you can grasp it. Qualified result is: No bubble inside the tape, no edge cracking. The strip will cool down in about 10 minutes and cannot be torn down or if forcibly torn, fabric coating will be brought down together with the tape. 

These products comply with SGS and European environmental protection standards. EN 1122:2001 Passed,Vinyl Chloride Monomer Excluded,Oeko-Tex Standard 100 Passed,Azo Dyestuff Test Passed 

It applies to high-grade 3-ply cloth face fabrics, high-grade PU coated face fabrics, high-grade vehicle/ship shrouds, waterproof shoes, waterproof gloves, waterproof bags, sailing suit, mountaineering ware, diving suit, raincoats, rain caps, down wear, ski boot, vehicle shrouds, skip shrouds, military waterproof and cold protection clothing, protective clothing, field operations clothing and other waterproof articles.
Usually different material needs different data. Some main principles, normally, semi transparent will be lower, lighter and faster than 3 ply ones: 
1. For semi transparent TPU tape composite pure, the temperature will be 450-480 centigrade, press force will be about 1KG, and speed will be 10 meters per minute. 
2. For three ply cloth TPU tape with heat melt glue, the temperature will be 480-530 centigrade, press force will be about 1.5-2.0KG, and speed will be 5-6 meters per minute.
3.  If by iron by hand, 100-160 centigrade, 10-15 seconds, depending on your pra ctice.
Large orders we recommend to send us your sample cloth before you order.








Click to edit the product in Ali Orders.
Note: only show for shop owner